GPS/北斗/GLONASS/GALILEO/QZSS/SBAS Receiver Module
NV08C-MCM全球导航模块 双通道多系统融合定位
• 支持GPS, 北斗,俄罗斯GLONASS, 欧洲GALILEO, QZSS, SBAS地区性广域差分增强系统(WAAS, EGNOS, MSAS, GAGAN) L1频段
• 高度集成FBGA球阵列封装9x12x2.5mm,为SMT设计
• 导航与授时应用
• 32路信号追踪GNSS全球导航卫星系统
• 200K相关器保证TTFF(Time to first fix)首次定位时间短和高感度
• 辅助导航A-GNSS可选
• Dead Reckoning航位推算接口透过Patch补丁可选
• 支持NMEA 0183 (IEC 1162), BINR(原厂二进制接口协议), RTCM SC-104数据通信协议
• 原始数据 (伪距、载波相位、多普勒)
• 独立的GLONASS群延时修正(确保最高精度原始数据)
• 支持RAIM飞行接收机自体完好性监测功能
• 20毫瓦低功耗,在不时定位时间(Time-to-time Fix,TTTF)模式下
• 低/高温工作范围‐30(-40)to +85°C
NV08C-MCM是组合卫星导航接收器。其重要特征是它支持GNSS全球导航卫星系统。不仅接收GPS卫星信号,也支持北斗卫星,它还支持俄罗斯Glonass、欧洲伽利略和SBAS系统。
NV08C-MCM设备为适合大规模应用、低功耗、小尺寸、卓越性能和低成本要求而设计:
车载和个人手持导航设备
资产与人员跟踪
防盗系统
监控与安防系统
NV08C-MCM提供GNSS信号搜星与跟踪高感度和高性能,兼备低功耗、小尺寸。
支持GPS/GLONASS/GALILEO辅助定位和先进的省电模式。
基于多个星座获得多个卫星导航系统与单GPS卫星导航系统(或任意单卫星导航系统)相比,在城市高楼林立的环境下仍然具有足够的导航卫星信号。
对于产品集成商来说,NV08C‐MCM提供了多种界面,灵活的电源方案可选,有源天线可选。紧凑的结构和完全的GNSS接收器,可以集中在一个低成本的2或4层PCB上,只需最少数量的无源器件。
导航性能:
定位精度 (RMS)*
SBAS:1-1.5m
实时差分Real-time Differential: 0.5-1m
后处理差分Differential post-processing:0.3m
首次定位时间(TTFF) *:
感度:
动态限制
速度 500 m/s
加速度 5g
海拔 18000 m(可升级解除高度限制)
坐标系统
WGS-84地心坐标系, PZ-90, SK-42, SK-95坐标系
* 典型值
射频功能
内置LNA低噪声放大器 (控制开关置于省电模式)
射频结构 双通道射频前端: GPS/GALILEO/COMPASS/SBASS L1
GLONASS L1
天线类型: 有源1 或无源
内部时钟: 26MHz TCXO温度补偿晶振
1- 推荐有源天线: GPS/GLONASS L1, 35 MHz带宽, 20dB Gain, NF < 2dB, 衰减35 dB @ fc ± 70 MHz
环境参数
操作温度: -30(40) 至 +85ºC
最大操作湿度: 98% 在+40ºC时
数据接口
定位数据更新输出频率: 1,2,5,10Hz
TTTF模式数据输出: (1 -60s)-1
支持协议标准: IEC1162 (NMEA 0183), BINR(原厂协议), RTCM SC 104 v2.2
主机通信接口:
数据交换速度:高至230’400 bit/s
电气参数
单电压 3.0…5.5V
双电压 1.2V/3.0...5.5V
仅GPS 不时定位时间TTTF/推定位时间PTF = 1秒 16 毫瓦
GNSS 不时定位时间TTTF/推定位时间PTF = 1秒 20 毫瓦
仅GPS 跟踪和导航模式下 < 100 毫瓦
GNSS 跟踪和导航模式下* < 150 毫瓦
* 平均值 TTTF: Time-to-time Fix, PTF: Push-to-fix
NV08C-MCM
GPS/GLONASS/GALILEO/COMPASS RECEIVER
The NV08C-MCM is an integrated satellite navigation receiver. The device’s key feature is its ability to work with both global navigation satellite systems (GNSS) that have been deployed so far in the world – GPS and GLONASS. The GALILELO and COMPASS as well as SBAS systems are also fully supported.
The NV08C‐MCM device was developed for use in high volume applications
demanding low cost, low power consumption and uncompromised performance
such as:
in‐car and handheld personal navigation
asset and personal tracking
anti theft systems
surveillance and security systems
The NV08C-MCM offers high sensitivity and high performance of GNSS signal
acquisition and tracking combined with low power consumption and small size.
The assisted GPS/GLONASS/GALILEO and advanced power saving modes are
supported.
Multiple satellites available from GNSS constellations ensure higher availability
of navigation signal in urban canyons compared to any single constellation
solution.
For system integrator the NV08C‐MCM provides a variety of interfaces, flexible power supply options, power supply for optional active antenna. A very compact and complete GNSS receiver can be integrated on a low cost 2 or 4‐layer PCB with a minimal number of external passive parts.
GNSS signals:
Navigation Features:
• Accuracy (RMS)*:
- horizontal autonomous mode 2.5 m
- differential mode 1 m
- height 3 m
- velocities 0.05 m/s
- time (1PPS) ±25 ns
• Time to First Fix*
- reacquisition <1 s
- hot start <3 s
- cold & warm start 30 s
• Sensitivity:
- tracking and reacquisition –160 dBm
- cold start –143 dBm
• Supported vehicle dynamics:
- velocity 500 m/s
- acceleration 5 g
- altitude 18000 m
• Coordinate system WGS-84, PZ-90 SK-42, SK-95
* typical values
Power supply:
• Supply voltage configuration:
- Single supply voltage 3.0…5.5 V
- Two supply voltages 1.2 V / 3.0...5.5 V
• Digital I/O voltage level 1.8…3.3 V
• Backup supply 1.2V, 4 µA
• Power consumption (Two supply voltages):
- GPS only time-to-time fix mode @ 1s* 16 mW
- GNSS time-to-time fix mode @ 1s* 20 mW
- GPS only tracking&navigation mode* < 100 mW
- GNSS tracking&navigation mode* < 150 mW
* average values