TW3150/TW3152 - 50 dB / 3 Stage Filtered Timing Antenna 50dB/3级滤波GPS L1授时天线
A family of high gain (50dB) and high rejection timing antennas. These antennas are specifically designed for timing applications in high density cell / telecommunications tower applications where high levels of near-out-of-band interfering signals can be expected. This antenna features a 50dB LNA gain to handle long cable runs often associated with installation on telecommunications towers.
The TW3150/52 covers the GPS L1 and SBAS (WAAS, EGNOS & MSAS) frequency band and employs Tallysman’s unique Accutenna™ technology to provide excellent cross polarization rejection and greatly enhanced multipath rejection.
适合长电缆通信基站授时天线。
替代停产的PCTel (MaxRad) GPS-TMG-50N授时天线,同样性能,更轻、更低功耗、更低价格。
IP67和军标MIL-STD-801F Section 509.4;RoHS和REACH。
The TW3150 features a four (4) stage dual filtered LNA, while the TW3152 includes an additional SAW pre-filter to provide exceptional rejection of close out-of-band signals and additional protection against saturation by high level sub-harmonic and L-Band signals. This provides better than 80dB of signal rejection above 1610MHz and below 1545MHz.
The antennas have a permanent mount, IP67 and MIL-STD-801F Section 509.4 compliant housing with metal base and an extended temperature range plastic radome, and is specifically designed to withstand the most challenging environmental conditions.
These antennas are REACH and ROHS compliant.
Specification 规格
Frequency Band 1575.42 ± 10MHz
Antenna Gain 4.5 dBic @90
Output VSWR <1.5:1
Amplifier Gain 50 dB min
Noise figure 2.5 dB typ.
DC Voltage 2.7 to 26 VDC
DC Current 30 mA typ, 35 mA max
Filtering 3 stages
Out-of-Band Rejection -60 dB @ ± 50 MHz off center
Weight 150 g
替代PCTel’s (MaxRad) GPS-TMG-50N,更轻、更低功耗、更低价格,同样性能。
Two options for mounting are available: an L-bracket (P/N#23-0040-0) or a pipe mount (P/N#23-0065-0).
Ordering Information 订货信息
TW3152 – High Gain / High Rejection Timing Antenna 33-3152-xx-yy-zzzz
TW3150 – High Gain / High Rejection Timing Antenna 33-3150-xx-yy-zzzz
Where xx = connector type, yy = shape and colour of radome, and zzzz = cable length in mm (where applicable)
Download