在社交媒体上共享

TW3320/TW3322 严格任务、性价比高天线

The TW3320/TW3322 is a high performance antenna covering the GPS L1, GLONASS L1 and SBAS (WAAS, EGNOS & MSAS) frequency band (1575 to 1606 MHz). It features a patch element with 40% wider bandwidth than hitherto available in this format. Unlike its competitors, both GPS-L1 and GLONASS signals are included in the 1dB received power bandwidth.

Applications

 Cost Sensitive Mission Critical Positioning 价格敏感严格任务定位

 Military & Security 军用与保安

 Fleet Management & Asset Tracking 车队管理与资产管理

Features

TW3320/TW3322 GPS L1, GLONASS L1 and SBAS antenna
  • High rejection SAW filter
  • Low noise LNA: 1dB
  • Temperature compensating LNAs

Benefits

  • Great out-of-band signal rejection
  • Excellent signal-to-noise ratio
  • Consistent response in all operating
    temperatures

The TW3322 has an additional tight pre- filter to protect against saturation by high level sub-harmonics and L-Band signals. 预滤波

The TW3320/TW3322 are housed in a through-hole mount, weather-proof enclosure for permanent installations. They are available with either a flat or conical radome in either grey or white. The TW3320/TW3322 is also available with either a TNC or N-Type connector on the base of the antenna or with a flying lead and a variety of connectors.   TNC、N-Type连接器等可选。

L-Bracket or Pipe Mount (part numbers 23-0040-0, 23-0065-0 respectively) are available for non-rooftop installation. They are IP67, RoHS, and REACH compliant. 非屋顶有L型支架、管型支架可选。

For further details, please download the Datasheet.

Specifications

Architecture:

Wideband single feed patch

Size:

66.5mm diameter

Weight:

150g

Enclosure:

Radome: EXL9330, Base: Zamak White Metal

Attachment Method:

Through hole (M18 x 1 thread)

Environmental:

IP67, REACH, and RoHS compliant


Electrical:

LNA Gain:

28dB min., TW3320; 26dB, TW3322

Supply Current:

15 mA max. at 85°C

Supply Voltage:

2.5 to 16 VDC nominal (12VDC recommended max.)

Noise:

1 dB typ., TW3320; 2.5dB typ., TW3322

Axial Ratio:

<4dB @ 1590MHz, 8 dB typical at band edges

 

For further details, please download the Datasheet.

Drawings

TW3000Family drawings