在社交媒体上共享

TW3340/TW3342(TW3370/TW3372)

TW3340/TW3342 (TW3370 / TW3372)严格任务定位、高增益天线

The TW3340/TW3342 (TW3370/TW3372) is a high Gain (40dB) GNSS antenna covering the GPS L1, GLONASS L1 and SBAS (WAAS, EGNOS & MSAS) frequency band (1575 to 1606 MHz). It features a patch element with 40% wider bandwidth than previously available in this format. Unlike its competitors, both GPS-L1 and GLONASS signals are included in the 1dB received power bandwidth.

The TW3340/TW3342 (TW3370/TW3372)has a three stage Low Noise Amplifier with a mid-section SAW. A tight pre-filter is available with the TW3372 to protect against saturation by high level sub-harmonics and L-Band signals making it particularly suitable for timing applications.

The TW3340/TW3342 (TW3370/TW3372) has a 19mm (3/4 Inch) though hole, permanent mount white-metal base, with an industrial-grade, IP67 compliant conical radome. Two options for pole mounting are available an L-bracket (P/N#23-0040-0) or a pipe mount (P/N#23-0065-0).

Tallysman has rationalized its part number system. No changes have been made to the mechanical or electrical properties of these products.  Where administratively possible, please use new Part Numbers: TW3340/TW3342,instead of TW3370/TW3372.   

 

Applications

 Timing applications 授时应用

 Fixed installations 固定安装

 Cost Sensitive Mission Critical Positioning 性价比高的严格任务定位

 Military & Security 军用与保安

Features

TW3370/TW3372 TW3000 Family
  • High gain LNA: 40dB
  • High rejection SAW fi lter
  • Low noise: 1dB
  • Temperature compensating LNAs

Benefits

  • Great out-of-band signal rejection
  • Excellent signal-to-noise ratio
  • Consistent response in all operating
    temperatures

Specifications

Architecture:

Wideband single feed patch

Size:

66.5 mm dia. x 21 mm H

Weight:

150g

Enclosure:

Radome: EXL9330, Base: Zamak White Metal

Attachment Method:

Through hole (M18 x 1 thread)

Environmental:

IP67, REACH, and RoHS compliant


Electrical:

LNA Gain:

41dB min., TW3370; 40dB, TW3372

Supply Current:

20 mA max. at 85°C

Supply Voltage:

2.5 to 16 VDC nominal (12VDC recommended max.)

Noise:

1 dB typ., TW3370; 2.5dB typ., TW3372

Axial Ratio:

<4dB @ 1590MHz, 8 dB typical at band edges

 

For further details, please download the Datasheet.

 

Drawing

TW3000FamilyDrawing